The industrial cooling solution for variable frequency water pumps is a solution that controls the speed of the water pump through a frequency converter to achieve cooling water circulation. At the same time, intelligent control of the water pump can be achieved, such as remote monitoring, fault alarm, etc.

The pressure sensor detects the pressure of the cooling water pipeline, and the temperature sensor detects the temperature of the cooling water, transmitting the signal to the frequency converter. The frequency converter controls the speed of the water pump based on the pressure and temperature signals, thereby adjusting the circulation of the cooling water. When the temperature of the cooling water increases, the frequency converter increases the speed of the water pump, increases the circulation of the cooling water, and thus reduces the temperature of the cooling water; On the contrary, when the temperature of the cooling water decreases, the frequency converter reduces the speed of the water pump, reduces the circulation of the cooling water, and thus saves energy.

Efficient and energy-saving: Adopting frequency conversion control, the water pump speed is adjusted according to the temperature and pressure of the cooling water, reducing energy waste.

Stable cooling: It can automatically adjust the speed of the water pump, maintain stable temperature and pressure of the cooling water, and improve the cooling effect.

Easy to operate: The control cabinet allows for convenient operation and monitoring of the system's operational status.

Extending the lifespan of the water pump: Variable frequency control can reduce the speed of the water pump, reduce its wear and tear, and prolong its service life.

PhoneAPP of PRODN control the pumps anywhere and any time.

Adjust Pressure Value, Adjust Working Mode

Start&Stop Pumps, Check Pressure

Warning, Check Fault Code

Check Working Situation

There are three working modes suitable for all domestic use.

BOOSTER UP

BOOSTER DOWN

TIMING / FILLING THE TANK

You can choose the working mode and set your desired requirement on the control panel. Very Easy for setting and used.

High speed, high efficiency, low energy consumption Permanent magnet high speed motor, small size and high efficiency, energy conservation and environment protection.

Sealing Stator and Rotor The stator and rotor are processed by a special sealing process. It avoids short circuits when water leaks into the motor.

Soft Start/Stop Reduces noise and protects equipment

Multiple Protection Function

Blocked protection, over voltage protection, overload protection, low voltage protection, motor lack phase protection, lightning protection, dry running protection, over current protection, protect the equipment and keep safe.

Rated voltage 220V, the working voltage is 130V~280V. The pumps will stop if the voltage is lower than 130V and start automatically when the voltage reaches 160V. The pumps will stop if the voltage is higher than 280V and start automatically when the voltage drops to 260V.

The variable speed motor will automatically adjust the motor speed according to the desired demand to save energy and reduce noise.

You can set your desired requirement on the control panel of our intelligent inverter pump. The pump can supply constant water pressure so that the user is no longer bothered by water pressure fluctuation due to a rise or fall in demand, or from start/stop function.

The noise is lower during the operation of the pump, bringing you a quiet waterlife.

The controller powered by the "Infineon" module, higher performance and much more stable.

Control program specially designed for water pump and had the copyright of software.

Electronic pressure transducer is used imported ceramic chip, no magnetic components, excellent pressure collection speed and longer service life.